Noticias  

Catálogo de Productos 2017/18

09/08/2017

Global Fire Equipment

Software nueva versión

01/08/2017

GFE

NUEVO SOFTWARE CONECTOR GFE

20/02/2017

GFE CONNECTOR

Detectores de llama: GFE-SWR

04/07/2016

Detectores

MCPE - montaje bajo perfil

31/05/2016

GFE-MCPE ADAPTER PLATE

Centrales GFE ya están en Internet

16/05/2016

GFE-TCP-WEB


certificados

Módulos - Direccionables - Entrada-Salida

MAINS IO

The MAINS I/O modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Fire Alarm Control panel using normally open dry contact connections.

The connection to the input is monitored for fault (open or short circuit) and alarm conditions. The interface is used to monitor the contacts of an external system which must be interfaced to the Fire Alarm System, for example a flow switch in a sprinkler system to indicate if the sprinklers have been activated or extinguishant level monitoring in Gas Extinguishing systems, etc.

Module is provided with a loop short-circuit isolator and with a voltage free single pole change over mains rated output. The output relay is always powered directly from the detection loop. It is not required to use an external 24V DC power supply. Relay operation is confirmed by an onboard red LED.


Características Principales

  • Fast Activation Response
  • Loop Powered
  • 5 Status LEDs provided
  • Low Power Consumption
  • Module features an integral short-circuit loop isolator
  • Single mains rated relay contact

Descargue la hoja de datos del producto

Para descargar las instrucciones de instalación manual debe ingresar!

Descargue las instrucciones de instalación manual



< Voltar