Search

FAQs

What is the available address range for analog sounders?

Sounders with individual programming must be addressed between 94 and 125.

What's the maximum internal battery capacity (A/h) which can be fitted into GFE panels?

The maximum batteries capacity depends on the equipment as follows:• JUNO-NET main panel, repeater and extrenal sub-panels: 12 A/h• JUNIOR...

Which cable cross section is recommended to the detection loops?

You should always use shielded cable of the type appropriate for fire detection installations. Please note that cable types are also regulated by local...

What is the maximum length for a detection loop in a GFE analog panel?

The maximum recommended length is approximately 1200 m, but this value depends largely on the cable cross section and the load of the devices in that...

What is the maximum length for a conventional zone in a ORION panel?

The maximum length is 500 meters.

How can the analog value of a detector be checked?

GFE detectors are analogue detectors and hence transmit an analogue value to the panel corresponding to the quantity of smoke or heat being measured....

Which hardware it is necessary to implement ODYSSEY?

The hardware depends of the used communication technology according to the following:• Connection via RS-232 to short distances (maximum 3 m).This...

What is the purpose of the ODYSSEY software?

This application is a PC based remote supervision solution that allows graphical control and monitoring of up to 64 fire detection systems comprising...

How to establish communication through GFE CONNECTOR software?

To establish communication (mode 1) check the following points:• Disconnect all panels, sub-panels and repeaters, this should be done with the panel...

What are the features of GFE CONNECTOR software?

There are 3 operating modes available:1. Programming mode, which allows you to configure and program and download it to the panel.2. Online mode that...

How can I get the GFE support software tools?

The most recent versions are available through our website. In order to gain access to the downloads section you will need to be a registered user.

What are the available GFE support software tools?

The available softwares are the GFE CONNECTOR, GFE LOOP&BATTERY CALCULATOR and GFE VALKYRIE VOX LOADER. All these softwares are freeware.